Autumn weather can change quickly, and the first night frosts and slippery road conditions often arrive as early as October or November. Therefore, when planning your tyre change, you should consider the current requirements, the weather forecast and your everyday driving habits.
In Estonia, winter tyres must be fitted to passenger cars from 1 December to 1 March. This means that by the beginning of December at the latest, summer tyres must be replaced with compliant winter tyres. The requirement also applies to vans with a gross vehicle weight up to 3.5 tonnes.
Studded tyres are permitted from 15 October to 31 March. In winter road and weather conditions, it is exceptionally allowed to drive on studded tyres from 1 October to 30 April. For example, if there is an unexpected snowfall at the beginning of October or the roads become icy, you do not have to wait until 15 October to fit studded tyres.
Rules are more flexible for non-studded winter tyres. You may drive on compliant non-studded winter tyres in Estonia all year round, although in warm weather they may not offer driving characteristics as good as summer tyres.
It is important to remember that the dates set by law indicate when winter tyres must definitely be fitted. This does not mean that it is safe to drive on summer tyres until the last day of November. The actual need to change tyres depends primarily on the weather and road conditions.
When planning a tyre change, Transpordiamet recommends basing your decision on temperature and weather conditions. The general recommendation is to replace summer tyres with winter tyres when the average daily temperature consistently falls below +7 °C.
The reason lies in the rubber compound of the tyres. Summer tyres are designed for warmer conditions and their rubber compound becomes stiffer at low temperatures. As a result, the tyres’ grip may deteriorate and the braking distance increase. Winter tyres, on the other hand, have a compound adapted for colder conditions, and their tread pattern helps maintain grip on snowy and slippery roads.
However, the seven-degree threshold does not mean that a summer tyre automatically becomes dangerous below that temperature. It is a practical guideline alongside which you must consider the road surface condition, precipitation and the characteristics of the specific tyres.
You should be especially attentive in autumn, when daytime temperatures remain above zero but at night drop close to freezing. The road surface can freeze even when the air temperature is still a few degrees above zero. This can occur, for example, on bridges, viaducts and shaded road sections.
Therefore, it makes sense to monitor the weather forecast for several days. If night frost, sleet or snow is forecast for the coming days, it is worth scheduling a tyre change before those conditions arrive.
Before fitting last season’s winter tyres, you should check their condition. Even if the tyres look fine, worn tread, aged rubber compound or hidden damage can affect their performance.
The most important indicator is tread depth. In Estonia, the remaining tread depth of winter tyres must be at least 3 millimetres, but Transpordiamet recommends replacing tyres already when the tread depth has decreased to 4 millimetres.
Deeper tread helps the tyre perform better in snow and slush and remove water and slush from the contact patch. Therefore, a tyre with the legally permitted minimum tread depth may not provide sufficiently good grip in challenging winter conditions.
You can check tread depth with a dedicated gauge. It is worth measuring in several places on the tyre, as the tread can wear unevenly. If one shoulder of the tyre is noticeably more worn than the other, this may indicate incorrect tyre pressure or suspension issues.
In addition to tread depth, you should keep an eye on the age of the tyres. The DOT code on the tyre sidewall shows the manufacturing time. Its last four digits indicate the production week and year. For example, the code 3422 means the tyre was manufactured in week 34 of 2022.
Over time, the tyre’s rubber compound ages and its properties may deteriorate even if there is still sufficient tread left. Therefore, for older tyres it is worth asking a specialist to assess their condition. The tyres should also be free from visible cracks, sidewall bulges and other damage. If you have any doubts about a tyre’s condition, it is sensible to have it checked before fitting.
The right time to change tyres does not depend only on the calendar or air temperature. With the same weather forecast, it may make sense for one driver to change tyres immediately, while another can plan the change somewhat later. The most important thing is to consider when and on what roads you drive daily.
In the early morning and late evening, the temperature can be noticeably lower than at midday. For example, it may be +8 °C during the day, but by early morning the temperature has dropped close to freezing. In such conditions, slippery sections can appear on the road even if during the day the driving conditions still feel entirely autumnal. If you start your workday early or often drive late in the evening, it is worth planning the installation of winter tyres before the first night frosts.
In cities, major streets are generally maintained more frequently than smaller side roads. Therefore, driving conditions may remain good for longer, but this does not rule out the formation of slippery patches. You should be especially careful at junctions, on bridges, in car parks and on smaller streets. Even on a short city drive, situations can arise where, in the event of sudden braking, tyre grip plays an important role. If you mainly drive during the day and the roads are dry, there may be a little more flexibility in timing the tyre change. However, you should heed the weather forecast and not wait for the first major snowfall.
Drivers covering long distances should consider changing tyres earlier. Road conditions can vary significantly during a single journey, especially if the route passes through different regions. On side roads, anti-slip treatment may be carried out less frequently, and snow or ice may remain on the surface for longer.
Forested and shaded sections can also freeze earlier than open roads. If you drive to work every day on smaller roads or often have to cover long distances, it is sensible to fit winter tyres before the first winter road conditions arrive. The simplest way to judge the right time is to monitor three things: your usual driving time, the road conditions on your route and the short-term weather forecast. If there is a risk of night frost or black ice and you have to drive regardless of the weather, do not delay changing tyres.
During a tyre change, it is not enough to simply replace one set of tyres with another. It is also important to check correct tyre installation, pressure and overall condition.
One of the most common issues is incorrect tyre pressure. Too low a pressure can increase tyre wear and fuel consumption and affect the car’s handling. Too high a pressure can, in turn, affect ride comfort and the tyre’s contact patch with the road.
Tyre pressure should be checked when the tyres are cold, following the vehicle manufacturer’s recommended values. These are usually indicated on a sticker in the driver’s door opening or in the vehicle’s owner’s manual.
Attention should also be paid to wheel balancing during the tyre change. Out-of-balance wheels can cause steering wheel or vehicle vibration, which often becomes more noticeable at higher speeds.
If the vehicle has a tyre pressure monitoring system (TPMS), you must ensure that it operates correctly after the wheel change. On some cars, the system must be reset after correcting the tyre pressures.
If you notice unusual vibration, the car pulling to one side or other changes in handling after a tyre change, you should visit a workshop for an inspection.
Carstop newsletter
Service reminders, useful advice and campaign offers straight to your inbox.